Arduino-based Input/output software
for DIY home cockpit simulator
|1.12||- Fixed the bug with Programmed Input values not being accepted correctly.|
- Fixed the crash with LAN connection in Windows version.|
- Support for inputs from SimVim Panel (v2.3).
- USB_FIX now enabled by default in Windows version.
- Fixed the dot not disappearing when integer exceeds the number of digits on a 7-segment display with "Reverse" flag.
- Experimental quadratic function support for analog input (Q A0 A1 ... line under [A] config section) Update 1.11a: Fixed a bug related to multiple USB connections in Linux and Mac versions.
- "ardsimx/starter_ignition" command no longer requires "Press-and-hold" functionality configured.|
- Added optional step skipping for encoder input (experimental feature).
- Added an option for config.ini - "USB_FIX = 1" (only use if you experience the rare bug with USB communication stopping after "Scanning" finishes).
Update: Fixed a USB-related crash on Mac introduced since v1.9
1.10d for Mac: Fixed inputs not working.
- Output byte array type datarefs to Arduino (NAVAIDs) - will not work until the Library is updated|
- Fixed a bug with press-and-hold commands also executing a momentary action on start
- Implemented custom commands for Starter+Ignition (included in the configurator)
- Optional limits for dataref values controlled by encoders or increment buttons (config - third value in line, example: "1+,500"). Datarefs only.
- For Mac: Added support for USB port names starting with "cu."
- Press-and-hold for buttons on analog inputs now works properly|
- Fixed a crash caused under certain conditions by datarefs with Press-and-hold function
- Inverted Serial LED order on each register to reflect the new connection scheme
- Supports "d" and "b" config identifiers for differentiating between rotary switch digital positions and ordinary digital buttons
|1.7||Fixed a bug with continuous commands (such as engine ignition) and test buttons. Could potentially lead to crashes.|
- More options for Indication Test button (7-segments, direct and serial LEDs)|
- Added custom dataref for blinking LEDs (autopilot)
- Added Servo support
|1.5c||Fixed issue with Analog inputs not working when precision is configured between 51-100.|
|1.5b||Fixed typo in Stepper initialization code.|
|1.5a||Fixed a crash when connected to network router with broadcast support.|
- Internal code optimizations. More unification between input and output config|
- Added reverse digits order for 7-segment display
- Cyclic mode button can now be configured with the number of steps to increment
- Sends individual number to connected devices
- Modified "Repeat" function for commands
- Fixed Encoder mode output to LEDs
- Added Encoder mode output to Serial LEDs and Programmed Output
- "Test 7-segment display" button
Hotfix: Fixed crash when connecting to Arduino with no config for this Arduino present
|1.4||Fixed crash if array number is specified as "0" in config file.|
|1.3||Multiple-mode encoders fixed|
|1.2||- Added cyclic toggle buttons support|
- Changed repeat button config - now listed in [A] section