HomeI/O GuideArduino I/O InterfaceSimVim PanelTech TipsAboutForum

Main panel

Right Instrument Panel

 


Audio Selector Panel


pma6000b


Audio Selector Panel PMA6000B of PS Engineering was chosen for replication in this cockpit. See full info about this unit at the official PSI site: ps-engineering.com/ PMA6000B

.

b58img b58img b58img b58img b58img b58img

b58img b58img b58img b58img b58img b58img

b58img b58img b58img b58img b58img b58img

Assembled audio panel has two data cables. One of them has the 8-bit port for connecting to the bus board, and used for buttons input. The other cable is connected to the LED registers board for controlling the leds in the buttons and OMI lights.

Working buttons and LEDs are: Com1(receiver), Com2(receiver), Nav1, Nav2, MKR, ADF, DME, SPK (for real switching between headset and speaker), OMI lights. Transmitter Com1 is always ON


b58img b58img b58img b58img b58img b58img

 


Radio panel - NAV/COM, ADF, Transponder, GPS


GPS


b58img b58img b58img b58img b58img b58img

b58img b58img b58img b58img b58img b58img

 


Nav/Com Bendix/King KX 155A



Original KX 155A



Two KX 155A transceivers are made from 1-4mm PVC and red plexi. NAV Indicators used with the KX 155A are the KI 525A Horizontal Situation Indicator, the KI 209A and DME.



Ready and go!




ADF (automatic direction finder) KR 87




Original KR87

 

KR 87 is operating in pair with KI-227 indicator (or KI-228). ADF is made of PVC of 1 to 4 mm thick, and 3-mm red plexi has been used for the indicator window

 



Transponder Bendix/King KT 70



Original Bendix/King KT 70

 

 


 

ARTEX ELT-200 remote switch and vent

Emergency switch is made from 2-3mm PVC and top parts of the red switch (See original ELT-200).



 


© Copyright 2012 - Vlad Sychev